E100-6,500l - SILMAX

Drying Hoppers - SILMAX range of Dryers

The SILMAX drying hoppers with integrated microprocessor control are available in table versions from 70 up to 1,200 l and free standing up to 6,500 l.

SmartFlow Intelligent Air Distribution

Automatic air distribution to adjust to different materials and fluctuating material demands.

Airflow Display

A simple check of the air volume through each drying hopper is possible.

Integrated CAN Interface

Allows extensive data exchange and status forwarding between the dryer and a central system for visualization.Allows extensive data exchange and status forwarding between the dryer and a central system for visualization.

Robust Stainless Steel Execution

All components in contact with the material are made of stainless steel and are therefore perfectly suited for critical and abrasive applications.

Efficiency Enhancing Insulation

The drying hoppers are equipped with 40 mm thick insulation across the entire height in order to reduce heat losses and increase drying efficiency.

Convenient Clean Out Door

Drying hoppers of sizes 100 l and up are equipped as standard with a clean out door ideally suited for the respective hopper diameter. The perfect geometry of the hopper guarantees uniform drying of the material across the entire crosssection.

Integrated Sight Glass

For the convenient visual inspection of material flow and level.

Material Slide Gate

All drying hoppers are included as a standard with a manual slide gate.

Option: Vacuum Take-off Adapter

Available with one or two material outlets as well as with controlled discharged valve for the efficient purging after the loading cycle (in connection with WITTMANN M7.2 control system).