Series 301 - Water Flow Regulators
Flow Rate 0 - 30 l/min per circuit
The optimum flow regulator for large injection molding and blow molding machines. Its low pressure drop makes it suitable for highest flow volumes. However, by means of a special design of the regulating valves, excellent regulation and accurate reproduction of cooling water volume and temperature in the different mold circuits can also be achieved for low flow volumes.
Technical data:
Flow range per circuit: Standard 0 - 30 l/min. On request: AI, PVC-cones.Standard: Mold connections with G 3/8" brass threaded sleeve
On request: with screwed 14 mm brass socket for 1/2" hose, or screwed 20 mm brass socket for 3/4" hose
The Series 101and 301 Water Flow Regulators can be supplied with shutdown solenoid valves.
Valve Z:
Central shutdown of several mold circuits.
Application: e.g. controlled by the cycle of the injection molding machine.When the injection cycle is stopped the cold water flow is shutdown to avoid condesation on the mold cavities.
Valve E:
Shutdown of cooling water in individual mold circuits.
Application: e.g. chilled coresThe valve can also be controlled by a temperature controller from the injection molding machine for mold temperature control.