VM 150T - VM Series range of Injection Moulding Machines

Standard Features

Hydraulic

Oil filtration by fine flow filter with electrical clogging indicator
Oil level indicator with alarm
Closed-loop oil temperature control with oil pre-heating
Oil temperature monitoring
Oil tank with connections for external oil filtration
Seperate hand keys for core pulls
Display of actual pump system pressure via touchscreen

Clamping Unit

Clamping force adjustable via touchscreen
Closing and opening speed adjustable
Closing and opening force adjustable
Mold safety program
Bolt pattern and mold centring via EUROMAP
Hydraulic mold close inhibit, eletrically monitored
Mechanical mold safety mechanism for vertical clamp incl. electrical supervision

Injection Unit

Injection closed loop controled via value
Screw L/D=22 with check valve,screw and barrel nitrated
Thermocouple failure monitor
Maximum temperature supervision
Plaugable cylinder heater bands and thermocouple
Temperature control of feed throat, integrated
Open nozzle
Relief valve for nozzle pressure control
Injection unit mounted either in horizontal or vertical position (exept CM)
Purge guard
Hopper of V2A stainless steel can be shut and emptied
Selectable barrel stand-by temperature
Physical units - bar, ccm, mm/s etc.
Screw protection
Linear bearings for the injection unit
Infinitely variable adjustable height of horizontal injection unit, including stroke measuring device

Safety Gate

Safety gate left, right and behind clamp unit with electr, and hydr. monitoring, CE.
Infra red light curtain in operating station

Cooling and Conditioning

Cooling-water flow controller with temperature gauges in return lines, 4-way(free for use)

Electrical components

Operating voltage 230/400 V-3PH, 50 Hz
Software for operating hours counter
Closing/Opening - 5 profile steps
Ejection forward/back - 3 profile steps
Nozzle forward/back - 3 profile steps
Injection/Holding pressure - 10 profile steps
Screw speed/Back pressure - 6 profile steps
Manual purging program and material monitoring
Stroke zero offset settings
Start-up program
Adjustable injection pressure limitation
Switchover to holding pressure MASTER/SLAVE by injection time, screw stroke/injection volume and injection
Self-teaching temperature controller
Display of temperature inside electrical cabinet
Seven-day timer
Access authorization via USB interface
Access protection via password system
User programming system "APS"
Customized text system
4 freely configurable network connections
Freely configurable screen pages "User page"
Freely configurable status bar
Physical, process-related units
15"-color-TFT-touchscreen
Manual board with foil buttons
Automatic dimming
Logbook with filter function
Hardcopy function
Swivel-mounted control panel in operation station
Notepad function
Internal data storage via USB connection or network
Online language selection
Online selection of imerial or metric units
Online operator manual
Time Monitoring
Faster mold movements with both pump systems for choice
Quality table, storage capacity for 10000 events
Events protocol (logbook) for 10000 events
Cycle time analysis
Parts counter with good/bad part evaluation
12 Trend diagrams
12 SPC Charts
Actual value graphics with 16 curves
Alarm message via E-Mail
USB - 2x operating unit
Ethernet interface inside electrical cabinet
4 Envelope curves
Injection Integral supervision
Metering Integral supervision
Time supervision for ejecting parts (min, max)
Configurable manually or automatically stop of production
Mold status, injection status, insert and take out status and mold configuration
Supervision of safety strokes for ejector, clamp unit and injection unit
Pre selection of several times operation concerning insert or take out procedures
Dry operation cycle and deactivateable machine movements
Printing via USB connection or network

Accessories

Paint RAL 9002 grey white/RAL 5002 ultramarine blue

Download VM 150T PDF Brochure