direct plus 120 - TEMPRO
Mould Temperature Controllers
Equipped with additional monitoring functions. Two pressure sensors monitor the differential pressure between the supply and return pressure from the mold in order to show the precise flow rate through the mold. A deviation in flow rate and pressure over or below the set values will activate an alarm. When air purging the mold, the return water is pumped into the cooling system, allowing large volumes to be purged.
Standard Features
- Microprocessor controller, self-optimizing
- Maximum temperature monitoring
- Automator filling with pressure monitoring
- Automatic pump roation direction detection
- Sensor break monitoring
- Pressure indication and monitoring
- Flow indication and monitoring
- Adjustable maximum internal pressure
- Air purging for mold changes
- Dry contact for alarm output + audible alarm
- Operating hour counter
- Horn
Optional Features
- Connector for external sensor (PT 100)
- Pump made of stainless steel
- Serial interface to IMM
Technical Data
Heating capacity - 6 kW
0.5 kW, max. 5 bar* max. 30 l/min
Pump capacity enhanced - 0.75 kW, max. 6 bar max. 60 l/min
Cooling water connect. - G 3/8"
Mold connection - G 3/4"
Power supply - 3 x 400 V/50 Hz + MP