plus XL 90 - TEMPRO
Mould Temperature Controllers
Water Units
WITTMANN's new TEMPRO plus XL 90 can heat up even big molds within a short time to the required set point. Besides the strong heater (36 kW) we have reinforced flow (up to 200 l/min) and cooling capacity.
Purge out of molds is supported by an additional pump which pumps the water to the return line or drain. Thus the purge volume is unlimited.
Standard Features
- Microprocessor controller, self-optimizing
- Maximum temperature monitoring
- Sensor break monitoring
- Automatic filling with leakage monitoring and level control
- Automatic pump rotation direction detection
- Dry contact for alarm output plus audible alarm
- Connectors for external sensors (PT 100)
- Leakstop function
- Air purging for mold changes
- Operating hour counter
- Horn
Optional Features
- Pressure gauge/flow indication
- Serial interface (RS 232, RS 485, 20 mA, EUROMAP 17)
Technical Data
Heating capacity - 18/36 kWPump standard - T1001-50/60 Hz 2.2 kW, max. 5 bar, max. 100 l/min
Pump enhanced - T2001-50/60 Hz 2.8 kW, max. 5 bar, max. 200 l/min
Cooling water connection - G 3/4"
Mold connection - G 1 1/4"
Power supply - 3 x 400 V/50 Hz + MP