VM R 75
- VM R Series range of Injection Moulding Machines
Standard Features
- Hydraulic unit with 2 variable pressure and speed axial piston pump
- Oil filtration by fine flow filter with electrical clogging indicator
- Oil level indicator with alarm
- Closed-loop oil temperature control with oil pre-heating
- Oil temperature monitoring
- Oil tank with connections for external oil filtration
- Seperate hand keys for core pulls
- Display of actual pump system pressure via touchscreen
Clamping Unit
- Clamping force adjustable via touchscreen
- Closing and opening speed adjustable
- Closing and opening force adjustable
- Mold safety program
- Bolt pattern and mold centring via EUROMAP
- Hydraulic mold close inhibit, eletrically monitored
- Mechanical mold safety mechanism for vertical clamp incl. electrical supervision
- Hydr. ejector in operating position, several ejector programs, multiple strokes and parallel movements during machine cycle
- Rotary table with 2 stations, oscillating 180 °
- Hardened rotary table gear ring
- Mechanical indexation for final positioning of rotary table
- Rotary table covered by stainless steel
- Maintenance-poor slide plates below the rotary table
- Central lubrication for rotary table: sliding plates and gear ring
- Rotary table speed adjustable via touch screen
- Rotary table position visualization via touch screen
- Preselection of activ mold lower parts (1 or 2) for production process
Injection Unit
- Injection closed loop controled via value
- Screw L/D=22 with check valve,screw and barrel nitrated
- Thermocouple failure monitor
- Maximum temperature supervision
- Plaugable cylinder heater bands and thermocouple
- Temperature control of feed throat, integrated
- Open nozzle
- Relief valve for nozzle pressure control
- Injection unit mounted either in horizontal or vertical position (exept CM)
- Purge guard
- Hopper of V2A stainless steel can be shut and emptied
- Selectable barrel stand-by temperature
- Physical units - bar, ccm, mm/s etc.
- Screw protection
- Linear bearings for the injection unit
- Infinitely variable adjustable height of horizontal injection unit, including stroke measuring device
Safety Gate
- Safety gate left, right and behind clamp unit with electr, and hydr. monitoring, CE.
- Infra red light curtain in operating station
Cooling and Conditioning
- Cooling-water flow controller with temperature gauges in return lines, 4-way(free for use)
- 1 Cooling water circuits up to 120 ° CEL on rotary table via medium distributor (oscil. operation)
Electrical components
- Operating voltage 230/400 V-3PH, 50 Hz
- Software for operating hours counter
- Closing/Opening - 5 profile steps
- Ejection forward/back - 3 profile steps
- Nozzle forward/back - 3 profile steps
- Injection/Holding pressure - 10 profile steps
- Screw speed/Back pressure - 6 profile steps
- Manual purging program and material monitoring
- Stroke zero offset settings
- Start-up program
- Adjustable injection pressure limitation
- Switchover to holding pressure MASTER/SLAVE by injection time, screw stroke/injection volume and injection
- Self-teaching temperature controller
- Display of temperature inside electrical cabinet
- Seven-day timer
- Access authorization via USB interface
- Access protection via password system
- User programming system "APS"
- Customized text system
- 4 freely configurable network connections
- Freely configurable screen pages "User page"
- Freely configurable status bar
- Physical, process-related units
- 15"-color-TFT-touchscreen
- Manual board with foil buttons
- Automatic dimming
- Logbook with filter function
- Hardcopy function
- Swivel-mounted control panel in operation station
- Notepad function
- Internal data storage via USB connection or network
- Online language selection
- Online selection of imerial or metric units
- Online operator manual
- Time Monitoring
- Faster mold movements with both pump systems for choice
- Quality table, storage capacity for 10000 events
- Events protocol (logbook) for 10000 events
- Cycle time analysis
- Parts counter with good/bad part evaluation
- 12 Trend diagrams
- 12 SPC Charts
- Actual value graphics with 16 curves
- Alarm message via E-Mail
- USB - 2x operating unit
- Ethernet interface inside electrical cabinet
- 4 Envelope curves
- Injection Integral supervision
- Metering Integral supervision
- Time supervision for ejecting parts (min, max)
- Configurable manually or automatically stop of production
- Dynamic visualisation of rotary table movement
- Mold status, injection status, insert and take out status and mold configuration
- Supervision of safety strokes for ejector, clamp unit and injection unit
- Pre selection of several times operation concerning insert or take out procedures
- Dry operation cycle and deactivateable machine movements
- Printing via USB connection or network
Accessories
Paint RAL 9002 grey white/RAL 5002 ultramarine blue
Download VM R 75 PDF Brochure
