W702 - Sprue picker
Small Range range of Robots
For the removal of sprues and parts from the injection molding machine. The solid construction allows fast movement with low vibration for precise removal.
X-axis (kick-stroke)
- Heavy-duty linear rails and recirculating ball bearings.
- Swivel base to rotate the arm behind the fixed platen for mold changes and locating pin to precisely reposition arm for part removal.
Y-axis (vertical stroke) 0-550mm (21.7") or 700mm (27.6")
- Adjustable stroke.
- Pneumatic shock absorbers.
- Locking cylinder to prevent the arm from drifting down into the mold in the event of air pressure loss.
- The Y-axis is also equipped with a heavy-duty switch as an additional interlock before the mold can close.
- Energy chain for less wear of tubing.
Z-axis (pivot)
- Freely adjustable from 45 °-95 °.
- Simple change-over from rear side to operator side placement.
B-axis (90 °C tooling rotation)
- Rotation is made automatically when pivoting the Z-axis out of the press.
Mechanical Sprue Gripper with part monitoring.
optional
- Venturi vacuum with part monitoring.
- Parts gripper with 4 suction cups.